Edit Selected Dialing - Siemens OpenStage 60/60 G Operation Manual

Step by step

Edit selected dialing?

Number:
Label:
Save & exit
Edit selected dialing
You can program a sensor key, without having previous-
ly configured a repdial key, so that it is immediately pro-
grammed with the number and label of the destination.
It is irrelevant whether this key has already been pro-
grammed with other functions If keys have been pro-
grammed with fixed functions, you will be notified.
S
Press and hold the required sensor key.
Confirm.
If the key was previously programmed with repdial, the
name and number are transmitted.
Select and confirm the option shown.
j
Enter or change the destination number.
Confirm.
j
Enter or change the destination number.
Select and confirm the option shown.
Programming sensor keys
107