Configuring Dss Keys - Siemens OpenStage 60/60 G Operation Manual

Programming sensor keys
Step by step
Assigning telephony function
Key function?
Change?
Direct Station Select?
Save?
Service Menu
Destinations?
g
Direct Station Select?
104

Configuring DSS keys

Direct station selection keys can be assigned an internal
number from the HiPath 4000 network.
A typical application of direct station selection keys is
the executive-secretary configuration
You must first program a sensor key with the "Direct sta-
tion select" function. Then you must define the phone
number and label.
Programming a sensor key as a repdial key
S
Press and hold the required sensor key.
Select and confirm the option shown.
or
v
Open the program/service menu
Select and confirm the option shown.
S
Press the required sensor key.
Confirm.
Select and confirm the option shown.
Confirm.
DSS
The sensor key is now defined as a DSS key.
Programming a direct station selection key
Confirm.
Confirm.
Select and confirm the option shown.
S
Press the saved DSS key.
Your telephone can be configured so that direct
station selection keys cannot be set up, thus fa-
cilitating data and personal security. Contact your
service personnel should you have questions.
Page 155.
Page 43.