Using System Forwarding Instructions; Automatically Forwarding Calls; Delayed Call Forwarding - Siemens OpenStage 60/60 G Operation Manual

Step by step

Using system forwarding instructions

Automatically forwarding calls

The relevant service personnel can configure different
call forwarding settings in the system for internal and
external calls and activate these settings for your sta-
tion. The following calls may be forwarded
• All calls without restriction
• Calls on busy
• Calls on no reply
Forwarding for all calls without restriction should only
be configured if the station is only used for outgoing
calls (e.g. in an elevator).
If you have configured fixed or variable forwarding and
the manual forwarding destinations are not reachable
(e.g. busy), calls are automatically forwarded to system
forwarding destinations.

Delayed call forwarding

This forwarding type can be used for initial or second
calls.
Initial call
Prerequisite: "Call forwarding no reply" is activated
Page 84,
The caller hears the ring tone and is only forwarded to
another station once a set time (
elapsed.
Second call
Prerequisite: Second call
on busy/after timeout" or "Call forwarding no reply" are
activated Page 92.
If a second call is incoming, you will automatically hear
a call waiting tone and information about the caller is
displayed. You then have the option of accepting this
call before call forwarding is activated (e.g. if you are
waiting for an urgent call).
Call forwarding
Page 92) has
Page 66 and "Forwarding
95