Transferring A Conference - Siemens OpenStage 60/60 G Operation Manual

Enhanced phone functions
Step by step
Toggle?
Release and return?
Answer camp-on?
Conference?
Conference g
Consultation?
Conference g
Add to conference?
72
or
Toggle between the conference and the consultation
call.
or
Select and confirm to end the consultation call and re-
turn to the conference.
Accepting a second call and connecting it to the
conference
If you receive a second call during the conference
Page 67, you can connect this party to the confer-
ence.
[
You are participating in a conference.
Z
An alert tone is audible.
T
Press the "Pickup" (
or Only if a "Pickup" sensor key is not configured:
Select and confirm the option shown.
[
You are immediately connected to the second caller.
The conference is on hold.
Select and confirm to connect the second call to the
conference.

Transferring a conference

Each party can transfer the conference to a third party
whom they have called via a consultation call or via the
"Add to conference?" function. This party is not a partic-
ipant in the conference at this point. The conference
cannot be transferred to a second call.
Prerequisite: You are in a conference.
3:08
Confirm.
Select and confirm the option shown. The conference
participants are placed on hold.
j
Call a party.
or
3:08
Confirm.
Select and confirm the option shown.
Page 108) sensor key.