Overview Of Call Forwarding Types - Siemens OpenStage 60/60 G Operation Manual

Call forwarding
Step by step
84

Overview of call forwarding types

Different input masks are displayed depending on how
you program call forwarding (call forwarding key
Page 85 or Program/Service menu
entries in the relevant menus correspond as explained in
the following table:
Call forwarding key Program/Service menu
Variable: All calls
All calls are forwarded, the saved phone number is deleted af-
ter deactivation.
Variable: External calls FWD-VAR-ALL-EXT on
Only external calls are forwarded.
Variable: Internal calls
Only internal calls are forwarded.
Variable: Busy
If your station is busy, all calls are forwarded.
Variable: No reply
If you do not answer a call, all calls are forwarded after a cer-
tain length of time.
Variable: Busy or No reply FWD-VAR-BZ/NA-BTH on
If your station is busy or you do not answer a call, all calls are
forwarded after a certain length of time.
Fixed: All calls
All calls are forwarded, the saved phone number is not delet-
ed after deactivation.
Apart from "Forwarding for intnl" and "Forwarding for
extnl", the call forwarding types are mutually exclusive.
You can set and activate one forwarding destination for
each of the two exceptions.
Page 92). The
FWD-VAR-ALL-BOTH on
FWD-VAR-ALL-INT on
FWD-VAR-BUSY-BOTH on
FWD-VAR-RNA-BOTH on
FWD-FIXED on