Repeat Dialing; Selected Dialing; Using Selected Dialing - Siemens optiPoint 410 entry S V6.0 Operating Instructions Manual

Schritt für Schritt

Repeat dialing

If req.
Shift

Selected dialing

If you pick up the handset before dialing or dial a
number while the handset is still on the hook, the
main line or the next available line will be busy im-
mediately.
Repeat Dialing
Prerequisite: The "Repeat dialing" function key is con-
figured, see
The last number dialed is always automatically stored
for repeat dialing.
n
Lift the handset.
Press the key. The last number dialed is redialed.
Selected Dialing
You can store frequently dialed numbers to a function
key. There are two types of selected dialing:
• Selected dialing: direct dialing of a telephone num-
ber, see
• Repertory dial: direct dialing of a telephone number
using dialing control functions, see

Using Selected Dialing

You can store the function "Selected dialing" to
the second level of a function key, see
page 38.
Prerequisite: The "Selected dialing" function key is con-
figured with a corresponding phone number, see
page 39.
In order to assign "Selected dialing" to the second level,
the function key "Shift" must also be configured, see
page 38.
n
Lift the handset.
Press the Shift key.
Press the "Selected dialing" function key. The stored
number is dialed.
page 46.
page 15.
Outgoing Calls
page 16.
15