Talking To Your Colleague With A Speaker Call - Siemens OpenStage 60/60 G Operation Manual

Step by step
Use speed dialing?
0
Dialing using individual speed dial numbers
Prerequisite: You have configured individual speed dial
numbers
v
Open the program/service menu
Select and confirm the option shown.
9
...
Press the configured speed dial key.
The connection is immediately established

Talking to your colleague with a speaker call

You can place a speaker call to an internal party using
the loudspeaker on their telephone. You can also use
the functions under "HiPath 4000 as an entrance tele-
phone system"
Prerequisite: A programmed "Speaker call-two-way"
sensor key is configured on your phone.
S
Press the "COM Spk 2way" programmed sensor key.
j
Enter the station number.
Z
Wait for the tone.
^
Lift the handset and speak to the party who answers.
or
n
Press the key and enter speakerphone mode.
If the party to whom you are speaking has acti-
vated "Speaker call protect" on their phone
(
as a normal call.
[1] Pay attention to the notes on voice encryption
Page 111.
Page 77.
Page 130), your speaker call will be received
Enhanced phone functions
Page 43.
[1]
.
Page 126.
65