Using The Key Push-Pull - Siemens OpenStage 60/60 G Operation Manual

Enhanced phone functions
Step by step
68

Using the key Push-Pull

If the function key Push-Pull has been configured by ser-
vice personnel, you can use it for the following func-
tions:
• Consultation (return to waiting call or waiting confer-
ence)
• Toggle/Connect
• Acceptance of a second call
• Acceptance of a group call
Second call
Z
You hear a call waiting tone. Information for the call is
displayed.
T
Press the flashing "Push-Pull" function key. You pick up
the waiting call. The LED lights up.
Toggle/Connect
[
You are connected with two parties. One party is on
hold. The "Push-Pull" function key illuminates.
R
Press the "Push-Pull" function key to switch to the other
party. The first party is placed on hold.
Consultation
[ j
You call the second party. The second party does not
answer.
S
Press the "Push-Pull" function key to return to the wait-
ing party or conference.
Group call
[
You are connected with a party. A group call is waiting.
Information for the group call is displayed.
T
Press the flashing "Push-Pull" function key. You pick up
the group call, the first party is placed on hold. The LED
lights up.