Third-Party Monitoring - Siemens OpenStage 60/60 G Operation Manual

Step by step

Third-party monitoring

During a call, a predefined party can be prompted to join
the call as a "witness" using the "Slnt Mon Req" pro-
grammed sensor key. Your call partner is not informed
that a "witness" is joining the call. The "witness" cannot
participate in the call; they can only hear what is being
said.
When configuring and using third-party monitor-
ing, please note the applicable data protection
regulations.
Prerequisite: Third-party monitoring is configured in
your system and the programmed sensor key "Slnt Mon
Req" is configured on your phone. You are conducting a
call. "Privacy" must be deactivated.
S
Briefly press the "Slnt Mon Req" programmed sensor
key twice. The "witness" hears a special tone on their
phone and the message "Connect witness or tape" ap-
pears on their display.
^
The "witness" lifts the handset.
or
T
The "witness" presses the line key for the line on which
the call is being conducted.
The "witness" can now listen to the call without being
noticed.
Only the "witness" may end silent monitoring, by
hanging up or pressing the line key.
Making calls with multiple lines
151