Table of Contents
Advertisement
6.6 Wide Scan
This screen allows you to discover base stations by entering one or more
frequency ranges and bandwidth on which to scan.
Click WiMAX > Wide Scan to open this screen as shown next.
Figure 21 Wide Scan Screen
This screen contains the following fields:
Table 15 Wide Scan
LABEL
Wide Scan Settings
Auto Wide
Scan
Wide Scan Range
Start
Frequency
(KHz)
End
Frequency
(KHz)
Step (KHz)
Bandwidth
(MHz)
Delete
Add
OK
Wide Scan Result
This table displays the available frequency band(s) found through the wide scan.
Frequency
(KHz)
Bandwidth
(MHz)
MAX208M User's Guide
DESCRIPTION
Use this to enable (Yes) or disable (No) automatically scanning for
base stations.
Enter the start frequency in kilohertz (KHz) for a wide scan range.
Enter the end frequency in kilohertz (KHz) for a wide scan range.
Enter the step increment in kilohertz (KHz) that the wide scan jumps
each time it scans between the start and end frequencies.
Enter the frequency bandwidth to be scanned.
Click this to remove a range of frequencies from the wide scan range
list.
Click this to add a range of frequencies to the wide scan range list.
Click this so save any changes to the wide scan range list.
This field displays the frequency in kilohertz (KHz).
This field displays the bandwidth in megahertz (MHz).
Chapter 6 WiMAX
71
Advertisement
Table of Contents
