ZyXEL Communications MAX208M User Manual page 37

Type http://192.168.100.1 in your browser after the WiMAX Device finishes
3
starting up completely.
Log into the Web Configurator and open the Network Setting > LAN > DHCP
4
screen.
Select Server for the DHCP mode, then enter 192.168.100.10 and
5
192.168.100.30 as your DHCP starting and ending IP addresses.
Leave the other settings as their defaults and click Save.
6
Next, go to the Network Setting > WAN screen and select NAT in the
7
Operation Mode field. Click Save.
Connect your computers to the WiMAX Device's Ethernet ports and you're all set!
8
MAX208M User's Guide
Chapter 4 Tutorials
37