Table of Contents
Advertisement
Chapter 9 Maintenance
9.9 Date
Use these settings to set the system time or configure an NTP server for automatic
time synchronization.
Click Maintenance > Date/Time > Date to open this screen as shown next.
Figure 59 Date Screen
This screen contains the following fields:
Table 48 Date
LABEL
Manual
New Time
New Date
Get from Time Server
Time
Protocol
Time Server
Address 1~4
128
DESCRIPTION
Enter the new time in this field.
Enter the new date in this field.
Select the time service protocol that your time server uses. Check with
your ISP or network administrator, or use trial-and-error to find a
protocol that works.
•
NTP (RFC 1305) - This format is similar to Time (RFC 868).
Enter the IP address or URL of your time server. Check with your ISP or
network administrator if you are unsure of this information.
MAX208M User's Guide
Advertisement
Table of Contents
