Table of Contents
Advertisement
Chapter 3 Setup Wizard
The following table describes the labels in this screen.
Table 7 Setup Wizard > WiMAX Frequency Settings
LABEL
Setting Type
Step
Start Frequency
End Frequency
Bandwidth
#
Frequency (MHz)
Total Num
Delete
Add
OK
#
Band Start (KHz)
Band End (KHz)
Total Num
Back
Next
30
DESCRIPTION
Select the WiMAX frequency setting type from the list.
•
By Range - Select this to set up the frequency based on
a range of MHz.
•
By List - Select this to set up the frequency on an
individual MHz basis. You can add multiple MHz values to
the list.
Enter the increments in MHz by which to increase the
frequency range.
Note: This field only appears when you select By Range
under Setting Type.
Enter the frequency value at the beginning of the frequency
range to use. The frequency is increased in increments equal
to the Step value until the End Frequency is reached, at
which time the cycle starts over with the Start Frequency.
Note: This field only appears when you select By Range
under Setting Type.
Enter the frequency value at the end of the frequency range
to use.
Note: This field only appears when you select By Range
under Setting Type.
Set the frequency bandwidth in MHz that this WiMAX Device
uses.
This is an index number for enumeration purposes only.
Displays the frequency MHz for the item in the list.
Displays the total number of items in the list.
Click this to remove an item from the list.
Click this to add an item to the list.
Click this to save an newly added item to the list.
This is an index number for enumeration purposes only.
Indicates the beginning of the frequency band in KHz.
Indicates the end of the frequency band in KHz.
Displays the total number of items in the list.
Click to display the previous screen.
Click to proceed to the next screen.
MAX208M User's Guide
Advertisement
Table of Contents
