Wds Scan - ZyXEL Communications VMG4380-B10A User Manual

Chapter 7 Wireless
Table 26 Network Setting > Wireless > WDS (continued)
LABEL
Remote Bridge
MAC Address
#
MAC Address
Modify
Scan
Apply
Cancel

7.7.1 WDS Scan

You can click the Scan icon in Wireless > WDS to have the Device automatically search and
display the available APs within range. Select an AP and click Apply to have the Device establish a
wireless link with the selected wireless device.
Figure 41 WDS: Scan
The following table describes the labels in this screen.
Table 27 WDS: Scan
LABEL
Wireless Bridge Scan Setup
Refresh
#
SSID
BSSID
Apply
Cancel
116
DESCRIPTION
You can enter the MAC address of the peer device by clicking the Edit icon under Modify.
This is the index number of the entry.
This shows the MAC address of the peer device.
You can connect to up to 4 peer devices.
Click the Edit icon and type the MAC address of the peer device in a valid MAC address
format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to remove this entry.
Click the Scan icon to search and display the available APs within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG4380-B10A / VMG4325-B10A User's Guide