ZyXEL Communications MAX208M User Manual page 148

Chapter 11 Product Specifications
Table 60 Firmware Specifications (continued)
FEATURE
DHCP
IP Alias
Time and Date
Logging
Table 61 Standards Supported
STANDARD
RFC 768
RFC 791
RFC 792
RFC 792
RFC 826
RFC 854
RFC 1349
RFC 1706
RFC 1889
RFC 1890
RFC 2030
RFC 2104
RFC 2131
RFC 2401
RFC 2409
RFC 2475
RFC 2617
RFC 2782
148
DESCRIPTION
DHCP (Dynamic Host Configuration Protocol) allows the
individual clients (computers) to obtain the TCP/IP
configuration at start-up from a centralized DHCP server. Your
device has built-in DHCP server capability enabled by default.
It can assign IP addresses, an IP default gateway and DNS
servers to DHCP clients. Your device can also act as a
surrogate DHCP server (DHCP Relay) where it relays IP
address assignment from the actual real DHCP server to the
clients.
IP alias allows you to partition a physical network into logical
networks over the same Ethernet interface. Your device
supports three logical LAN interfaces via its single physical
Ethernet interface with the your device itself as the gateway
for each LAN network.
Get the current time and date from an external server when
you turn on your WiMAX Device. You can also set the time
manually.
Use the WiMAX Device's logging feature to view connection
history, surveillance logs, and error messages.
DESCRIPTION
User Datagram Protocol
Internet Protocol v4
Internet Control Message Protocol
Transmission Control Protocol
Address Resolution Protocol
Telnet Protocol
Type of Service Protocol
DNS NSAP Resource Records
Real-time Transport Protocol (RTP)
Real-time Transport Control Protocol (RTCP)
Simple Network Time Protocol
HMAC: Keyed-Hashing for Message Authentication
Dynamic Host Configuration Protocol
Security Architecture for the Internet Protocol
Internet Key Exchange
Architecture for Differentiated Services (Diffserv)
Hypertext Transfer Protocol (HTTP) Authentication: Basic and
Digest Access Authentication
A DNS RR for specifying the location of services (DNS SRV)
MAX208M User's Guide