Wds Scan; The Wireless Others Screen - ZyXEL Communications P-660HN-51 User Manual

6.7.1 WDS Scan

You can click the Scan icon in Wireless > WDS to have the Zyxel Device automatically search and
display the available APs within range. Select an AP and click Apply to have the Zyxel Device establish
a wireless link with the selected wireless device.
Figure 27 WDS: Scan
The following table describes the labels in this screen.
Table 19 WDS: Scan
LABEL
Wireless Bridge Scan Setup
Refresh
#
SSID
BSSID
Apply
Cancel

6.8 The Wireless Others Screen

Use this screen to configure advanced wireless settings. Click Network Settings > Wireless > Others. The
screen appears as shown.
See Section 6.9.2 on page 79
Chapter 6 Wireless
DESCRIPTION
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
P-660HN-51 User's Guide
75