Table of Contents
Advertisement
Chapter 5 System Status
The following tables describe the labels in this screen.
Table 10 Status
LABEL
System Information
System
Model Name
Software
Version
Firmware
Version
Firmware
Date
System
Time
Uptime
System Resources
Memory
CPU
WiMAX
Device
Status
UMAC State
54
DESCRIPTION
This field displays the WiMAX Device system model name. It is used for
identification.
This field displays the Web Configurator version number.
This field displays the current version of the firmware inside the device.
This field shows the date the firmware version was created.
This field displays the current system time.
This field displays how long the WiMAX Device has been running since it
last started up.
This field displays what percentage of the WiMAX Device's memory is
currently used. The higher the memory usage, the more likely the
WiMAX Device is to slow down. Some memory is required just to start
the WiMAX Device and to run the web configurator. You can reduce the
memory usage by disabling some services; by reducing the amount of
memory allocated to NAT and firewall rules (you may have to reduce
the number of NAT rules or firewall rules to do so); or by deleting rules
in functions such as incoming call policies, speed dial entries, and static
routes.
This field displays what percentage of the WiMAX Device's CPU is
currently used. The higher the CPU usage, the more likely the WiMAX
Device is to slow down.
This field displays the WiMAX Device current status for connecting to
the selected base station.
Scanning - The WiMAX Device is scanning for available base stations.
Ready - The WiMAX Device has finished a scanning and you can
connect to a base station.
Connecting - The WiMAX Device attempts to connect to the selected
base station.
Connected - The WiMAX Device has successfully connected to the
selected base station.
This field displays the status of the WiMAXconnection between the
WiMAX Device and the base station.
Network Search - The WiMAX Device is scanning for any available
WiMAX connections.
Disconnected - No WiMAX connection is available.
Network Entry - A WiMAX connection is initializing.
Normal - The WiMAX connection has successfully established.
MAX208M User's Guide
Advertisement
Table of Contents
