Table of Contents
Advertisement
Chapter 6 WiMAX
Table 14 Connect (continued)
LABEL
Device
Status
UMAC State
BSID
Frequency
(MHz)
RSSI (dBm)
CINR (dB)
70
DESCRIPTION
This field displays the WiMAX Device current status for connecting to
the selected base station.
Scanning - The WiMAX Device is scanning for available base stations.
Ready - The WiMAX Device has finished scanning and you can connect
to a base station.
Connecting - The WiMAX Device attempts to connect to the selected
base station.
Connected - The WiMAX Device has successfully connected to the
selected base station.
This field displays the status of the WiMAXconnection between the
WiMAX Device and the base station.
Network Search - The WiMAX Device is scanning for any available
WiMAX connections.
Disconnected - No WiMAX connection is available.
Network Entry - A WiMAX connection is initializing.
Normal - The WiMAX connection has been successfully established.
This field displays the MAC address of the base station to which the
WiMAX Device is connected.
This field displays the frequency the base station uses in megahertz
(MHz).
This field displays the Received Signal Strength Indication (RSSI),
which is an overal measurement of radio signal strength. A higher RSSI
level indicates a stronger signal.
This field displays the average Carrier to Interference plus Noise Ratio
for the current connection. This value is an indication of overal radio
signal quality, where a higher value means a better quality signal.
MAX208M User's Guide
Advertisement
Table of Contents
