Table of Contents
Advertisement
8.3 MAC Filter
Use this screen to allow ("whitelist") or block ("blacklist") connections to and from
specific devices on the network based on their unique MAC addresses.
Note: This feature only works when the WiMAX Device is in bridge mode.
Click Security > Firewall > MAC Filter to open this screen as shown next.
Figure 46 MAC Filter Screen
This screen contains the following fields:
Table 38 MAC Filter
LABEL
Blacklist/
Whitelist
Source MAC
Destination
MAC
Mon ~ Sun
Start / End
Time
Add
OK
MAX208M User's Guide
DESCRIPTION
Select either whitelist or blacklist for viewing and editing.
This displays the source MAC for the MAC filter rule.
Click Add to create a new, empty rule, then enter the incoming MAC
address for the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
This displays the destination MAC for the MAC filter rule.
Click Add to create a new, empty rule, then enter the outgoing MAC
address for the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Select which days of the week you want the filter rule to be effective.
Select what time each day you want the filter rule to be effective. Enter
times in 24-hour format; for example, 3:00pm should be entered as
15:00.
Click this to add a new filter rule.
Click this to save any changes made to the list.
Chapter 8 Security
109
Advertisement
Table of Contents
