Table of Contents
Advertisement
6.3 Frequency Settings
Use this screen to have the WiMAX Device scan one or more specific radio
frequencies (given by your WiMAX service provider) to find available connections
to base stations.
Click WiMAX > Profile > Frequency Settings to open this screen as shown
next.
Figure 17 Frequency Settings Screen (By List)
A
B
Figure 18 Frequency Settings Screen (By Range)
A
B
This screen contains the following fields:
Table 12 Frequency Settings
LABEL
Setting Type
Join Wide Scan
Result
Default
Bandwidth
MAX208M User's Guide
DESCRIPTION
Select whether to scan base stations by entering specific frequency(-
ies) (By List) or a range of frequencies (By Range).
Note: When you select By Range, you can only configure one
range of frequencies in this screen. To configure multiple
frequency ranges, use the WiMAX > Wide Scan screen.
Note: Some settings in this screen are only available depending on
the Setting Type selected.
The scanning result of the frequency to scan you configured in this
screen will be shown in the WiMAX > Connect screen. Select this
option to determine whether to also append the wide scanning result
(configured in the WiMAX > Wide Scan screen) to the same table.
Select the default bandwidth (size) per frequency band you specify in
table A.
Chapter 6 WiMAX
63
Advertisement
Table of Contents
