Table of Contents
Advertisement
Click Network Setting > NAT > Port Forwarding to open this screen as shown
next.
Figure 35 Port Forwarding Screen
This screen contains the following fields:
Table 28 Port Forwarding
LABEL
Active
Name
Protocol
Incoming Port(s)
Start Port
End Port
Forward Port(s)
Start Port
End Port
Server IP
Delete
Wizard
Add
OK
MAX208M User's Guide
DESCRIPTION
This indicates whether the port forwarding rule is active or not.
The displays the name of the port forwarding rule.
This displays the protocol to which the port forwarding rule applies.
This displays the starting port number for incoming traffic for the port
forwarding rule.
This displays the ending port number for incoming traffic for the port
forwarding rule.
This field displays the beginning of the range of port numbers forwarded
by this rule.
This field displays the end of the range of port numbers forwarded by
this rule. If it is the same as the Start Port, only one port number is
forwarded.
This displays the IP address of the server to which packet for the
selected port(s) are forwarded.
Click this to delete a specified rule.
Click this to open the port forwarding "wizard".
Click this to add a new port forwarding rule.
Click this to save any changes made to the port forwarding list.
Chapter 7 Network Settings
91
Advertisement
Table of Contents
