Table of Contents
Advertisement
C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories:
•
Power, Hardware Connections, and LEDs
•
WiMAX Device Access and Login
•
Internet Access
•
Reset the WiMAX Device to Its Factory Defaults
10.1 Power, Hardware Connections, and LEDs
The WiMAX Device does not turn on. None of the LEDs turn on.
Make sure you are using the power adapter or cord included with the WiMAX
1
Device.
Make sure the power adapter or cord is connected to the WiMAX Device and
2
plugged in to an appropriate power source. Make sure the power source is turned
on.
Disconnect and re-connect the power adapter or cord to the WiMAX Device.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
page 18
for more information.
Check the hardware connections. See the Quick Start Guide.
2
MAX208M User's Guide
Troubleshooting
10
Section 1.2.1 on
139
Advertisement
Table of Contents
