Siemens hicom 150 H optiset E standard Operating Instructions Manual page 67

6WHS#E\#6WHS
*90=Control Relay On?
#90=Control Relay Off?
&RQWUROOLQJ#5HOD\V
If this function has been configured (contact System
Support), you can turn up to four relays on and off to
control different facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
Select and confirm.
or
or
or Enter the code for "on" or "off".
... Enter the relay.
6HQVRUV#+2IILFH3RLQW2&RP#2QO\,
If this function has been configured (contact System
Support), sensors detect signals, causing your phone to
ring and a message to appear on your screen.
5DGLR#3DJLQJ#+QRW#IRU#8161,
If paging equipment is connected to your system (con-
tact System Support), you can contact people via their
pocket receivers.
The pocket receiver indicates to the person you are
looking for that someone is trying to get in touch. The
person you page can then go to the nearest telephone
and call you.
The operating procedures differ according to the type of
radio paging equipment connected (simple or enhanced
paging equipment).
6LPSOH#3DJLQJ#(TXLSPHQW
Paging:
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe 150 V1.0 (system networking via PC net-
work) (Æ page 85)!
8VLQJ#2WKHU#)XQFWLRQV
9: