Siemens hicom 150 H optiset E standard Operating Instructions Manual page 2

%HIRUH#<RX#%HJLQ
These operating instructions describe the optiset E standard, optiset E advance plus/com-
fort and optiset E advance conference/conference telephones in Version 1.0 of the Hicom
150 H system.
They describe all functions you can use from your telephone. You may find that some func-
tions you wish to use are not available on your telephone. This may be due to one of the
following reasons:
• The function has not been configured for your telephone - address any questions to
Customer Support.
• Your communication system does not support this function - contact your Siemens
sales representative to upgrade your system.
+RZ#WR#8VH#WKHVH#2SHUDWLQJ#,QVWUXFWLRQV
6WHS#E\#6WHS
Program/Service
Speaker
Start conference?
Display contrast?
6FUHHQ#'LVSOD\V
Please dial
Return to held call?
5
You will find a graphic representation of the steps
in logical sequence in the left column. Below is an
explanation of the symbols:
Lift the handset (off-hook).
Replace the handset (on-hook).
Conduct a call.
Enter a telephone number or code.
Enter the code.
or Press volume controls on the telephone.
Press the key.
Press the illuminated key.
Press the flashing key.
The option appears on the screen.
Press the
Search for an option.
Press the
until the option appears on the screen.
Then press the
Line 1 displays prompts or acknowledgment
>
messages, depending on the situation.
Line 2 displays functions that you can confirm by press-
ing
can press
key to confirm your selection.
keys,
key to confirm your selection.
. If the symbol ">" appears on the right, you
to access further options.