Siemens hicom 150 H optiset E standard Operating Instructions Manual page 33

6WHS#E\#6WHS
Transfer?
Program/Service
* 56=Park a call?
Program/Service
Retrieve call?
Replace the handset.
or
Select and confirm.
If the connection between the two other parties
is not established within 45 seconds, the call
from the first part returns to you (recall).
3DUNLQJ#D#&DOO
You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Precondition: You are conducting a call.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
... Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
played, it is already in use; enter another one.
5HWULHYLQJ#D#3DUNHG#&DOO
Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
... Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).
&DOOLQJ#0XOWLSOH#3DUWLHV#6LPXOWDQHRXVO\
66