Siemens hicom 150 H optiset E standard Operating Instructions Manual page 43

6WHS#E\#6WHS
Delete?
US: Exit?
UK: End?
Program/Service
Speaker
Camp-on
Override?
Deleting a displayed entry:
Press the "OK" dialog key to confirm your selection
Ending callback display:
Select and confirm.
or
Press the key. The LED goes out.
or
Press the key. The LED goes out.
&DOO#:DLWLQJ#+&DPS02Q,
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the
display and the busy tone is followed by the ring tone.
The called party can then respond (Æ page 14)
The called party can prevent automatic call
waiting (Æ page 15).
%XV\#2YHUULGH#0#-RLQLQJ#D#&DOO#LQ#
3URJUHVV
This function is only available if it has been configured
by the service technician (contact System Support).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Select and confirm.
or
Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
,I#<RX#&DQQRW#5HDFK#D#'HVWLQDWLRQ#111
76