Client Mode - Lancom L-54g Wireless Manual

LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless
Chapter 5: Advanced wireless LAN configuration
Configuration with The access list for the matching of MAC addresses to the passphrases (LEPS)
WEBconfig or Telnet
can be found under WEBconfig or Telnet under the following paths:
Configuration tool
WEBconfig
Terminal/Telnet
5.3

Client mode

To connect individual devices with an Ethernet interface into a wireless LAN,
LANCOM devices with a WLAN module can be switched to "client mode",
whereupon they act as conventional wireless LAN adapters and not as access
points (AP). The use of client mode therefore allows devices fitted with only
an Ethernet interface, such as PCs and printers, to be integrated into a wire-
less LAN.
60
Menu/Table
Expert configuration Setup
Setup/WLAN-module/Access-list
WLAN-module Access-list