8.4 The Ground Tester Control Panel
After communication to the instrument is established (see § 8.4), the Ground
Tester Control Panel will appear.
The Control Panel consists of the following:
•
A shortcut toolbar.
•
A toolbar with the mode selection and start/stop buttons.
•
The instrument's status window (on the left-hand side):
- Recorded data from the instrument
- Real-time data
- Connection status
- The communications port and speed of the connection
- The model number, serial number, and firmware version
- Date and time from the clock
- Battery status
•
A configuration window that shows all of the parameters available for modifi-
cation. This window defaults to the instrument mode that is selected.
•
Real-time Measurement window that shows the measurement of each test
performed in real-time (available only after a test has been performed).
If the indicated items are not shown on the screen, select Restore Default Layout
from the Window menu.
52
uality Products Online at:
Figure 8-5
GlobalTestSupply
www.
Ground Resistance Tester Model 6470-B
.com
sales@GlobalTestSupp