AEMC 6470-b User Manual page 52

NOTE: The installation of the drivers may take a few moments. Windows may
even indicate that it is not responding, however it is running. Please wait for
it to finish.
14. When the drivers are finished installing, the Installation Successful dialog
box will appear. Click on OK.
15. Next, the Installation Wizard Complete window will appear. Click on Finish.
16. A Question dialog box appears next. Click Yes to read the procedure for con-
necting the instrument to the USB port on the computer.
NOTE: The Set-up window remains open. You may now select another option
to download (e.g. Adobe
17. Restart your computer, then connect the instrument to the USB port on the
computer.
18. Once connected, the Found New Hardware dialog box will appear. Windows
will complete the driver installation process automatically.
Shortcuts for DataView
installation process have been added to your desktop.
NOTE: If you connected your instrument to the computer before installing
the software and drivers, you may need to use the Add/Remove Hardware
utility to remove the instrument driver before repeating the process.
50
uality Products Online at:
Figure 8-3
Reader), or close the window.
®
and each instrument control panel selected during the
®
GlobalTestSupply
www.
Ground Resistance Tester Model 6470-B
.com
sales@GlobalTestSupp