Changing The Measurement Method; Programming The Distance For Electrode Placement - AEMC 6470-b User Manual

5.6.2
1. Set the switch to
2. Press the Hz
3. Press the Hz
4. Press the ► button to change to the Schlumberger method.
5. To confirm and exit, press the Hz
To switch back to the Wenner method, simply repeat this procedure.
The last measurement method selected (Wenner or Schlumberger) is stored in
memory when the device is switched off.
5.6.3
The distance can be programmed before or after the measurement. If it is not
programmed, only the value of R
indeterminate.
1.
Set the switch to
2. Press the 2nd button, then the DISTANCE button. The "hundredths" will blink.
Ground Resistance Tester Model 6470-B
uality Products Online at:

Changing the Measurement Method

button. "AUTO" will blink.
/OPTIONS
button again. "W" will blink.
/OPTIONS
ρ
H
W
d
S
d
ES
d
E
CONFIG AUTO

Programming the Distance for Electrode Placement

GlobalTestSupply
www.
.
button twice.
/OPTIONS
V
Hz
will be displayed, since the value of ρ remains
S-ES
.
ρ
H
W
d
S
d
ES
d
E
CONFIG AUTO
ρ
H
S
d
S
A
ES
d
E
CONFIG AUTO
.com
sales@GlobalTestSupp
V
Hz
V
x 2
Hz
35