Button Functions - AEMC 6470-b User Manual

2.5 Button Functions

START/STOP
MEM/MR
DISPLAY/
SMOOTH
H
z/OPTIONS/
DISTANCE
14
uality Products Online at:
Starts a measurement and compensates for lead resistance (§ 5.2.1).
A short push (<2s) enables a faster measurement because there is no
measurement of the auxiliary rod resistances.
A long push (>2s) - until the second beep occurs - enables the measure-
ment of all auxiliary rod resistances.
Measurement stops automatically (AUTO) or is stopped by pressing this
button again (MANUAL).
Selects the second function highlighted in yellow under the buttons.
Increases or decreases the value of the flashing parameter displayed or
selects the next parameter. Press the button for a longer time to increase
the change of value speed at a faster rate.
Selects the parameter to be modified or moves the cursor to the right.
MEM: Stores measurements to memory (§ 7)
MR: Retrieves measurements from memory.
DISPLAY: Displays all parameters of a measurement.
SMOOTH: Smooths the display of measurement providing a more
stable result.
Hz/OPTIONS: Enables configuration of measurement functions.
DISTANCE: Available for soil resistivity and V potential measurements. It
allows the setting of values of distances used for Rho (ρ) calculation.
GlobalTestSupply
www.
Ground Resistance Tester Model 6470-B
.com
sales@GlobalTestSupp