8.5.1
DC Continuity Test
When DC Continuity is selected from the tool bar, you can:
•
Select a 2- or 4-Wire test.
•
Select a test current (positive, negative or Auto ±).
•
Enter and activate an alarm from 1 to 999Ω (2-Wire only), if desired.
For very low resistance measurement, a lead compensation value (see § 5.2.1)
may be entered using the Change button.
Input noise status at the input of the meter is always displayed.
54
uality Products Online at:
Figure 8-6
GlobalTestSupply
www.
Ground Resistance Tester Model 6470-B
.com
sales@GlobalTestSupp