Table of Contents
Advertisement
ASSEMBLY
52
14
15
34
35
Tool:
Allen Wrench with
Phillips Screwdriver 5mm
Step 6
Remove two M5x10mm Bolts (52) from back of the Computer (15). Remove
bolts with the 5mm Allen Wrench with Phillips Screwdriver provided.
Connect the Extension Sensor Wire II (34) and Extension Hand Pulse Sensor
Wires (35) to the wires that come from the Computer (15). Then attach the
Computer (15) onto the Computer Bracket (14) with two M5x10mm Bolts (52)
that were removed. Tighten bolts with the 5mm Allen Wrench with Phillips
Screwdriver provided.
15
Advertisement
Table of Contents
