Table of Contents
Advertisement
ASSEMBLY
45
45
13
13
Tool:
31
33
8
Allen Wrench with
9
Phillips Screwdriver 5mm
10
11
Step 5
Connect the Extension Sensor Wire I (33) from the Right Handlebar
Support Tube (11) to the Extension Sensor Wire III (31) from the Right
Handlebar (9).
Attach both Left/Right Handlebars (8, 9) onto both Left/Right Handlebar
Support Tubes (10, 11) with two Handlebar Adorners (13) and four
M8x45mm Bolts (45). Tighten bolts with the 5mm Allen Wrench with
Phillips Screwdriver provided.
IMPORTANT: While installing the both left/right handlebars onto both
left/right handlebar support tubes, make sure the wires are installed
inside the right handlebar support tube and pay attention not to pinch the
wires.
NOTE: PLEASE FULLY TIGHTEN ALL HARDWARE INSTALLED IN
STEP 1 TO STEP 5 WITH THE TOOLS PROVIDED.
Hardware:
(45) Bolt M8x45mm
4 PCS
14
Advertisement
Table of Contents
