Computer - Exerpeutic 1020H Owner's Manual

COMPUTER

Quick Start:
Plug the Power Cord (37) into a wall outlet and flip the Power Switch (39) that is located at the
front of the treadmill to the ON position. Make sure the Safety Tether key (27) is positioned on the
Computer (26) then attach the Safety Clip (other end of the Safety Tether Key) securely to your
clothing. Always begin the treadmill standing on the side rails, not on the belt. The treadmill will start
moving at a speed of 0.4 MPH. While in the Quick Start mode, use the UP and DOWN buttons to
adjust the speed.
Button Functions:
START/STOP: Press the START/STOP button to start or stop the treadmill.
MODE: Press the MODE button to select each function (TIME, DISTANCE, or CALORIES) for set
up a workout goal value.
SET: Use the SET button to confirm goal values of TIME, DISTANCE, or CALORIES.
RESET: Press the RESET button to clear data values of TIME, DISTANCE, or CALORIES to zero.
Press and hold the RESET button for 2 seconds, and the console will be restarted.
SPEED UP: Press the SPEED UP button to increase speed.
SPEED DOWN: Press the SPEED DOWN button to decrease speed.
15