Table of Contents
Advertisement
14
35
12
47
8
Step 4
Connect the Hand Pulse Sensor Wire (12) from Left handlebar (8) to
Hand Pulse Sensor Wire(35) from the Computer bracket (14). Connect
speed sensor wire (31) from the Right Handlebar (9) to the Speed Sensor
Wire(34) from the computer bracket (14).
Connect the Hand Pulse Sensor Wire (12) from the Left Handlebar (8) to
the Extension Hand Pulse Sensor Wire (35) from the Computer Bracket
(14).
Then install the Computer Bracket (14) to both Left/Right Handlebars
(8, 9) by inserting the Computer Bracket (14) onto both Left/Right
Handlebars (8, 9), using two M8x16mm Bolts (47). Tighten bolts with
the 5mm Allen Wrench with Phillips Screwdriver provided.
IMPORTANT: While installing the computer bracket onto the right and left
handlebars, make sure the wires are installed inside the right and left
handlebars and pay attention not to pinch the wires.
Hardware:
ASSEMBLY
34
31
12
9
(47) Bolt M8x16mm
2 PCS
13
Tool:
35
Allen Wrench with
47
Phillips Screwdriver 5mm
Advertisement
Table of Contents
