Exerpeutic 1005 Owner's Manual page 14

ASSEMBLY
Tighten bolt and nylon nut with the 5mm Allen Wrench with Phillips
Screwdriver and Wrench provided.
Attach the Safety Tube A (24) onto the Main Frame (5) with one
M8x35mm Bolt (44), one Ø8.2xØ16x2T Nylon Washer (54), and one M8
Nylon Nut (57) that were removed. Tighten bolt and nylon nut with the
5mm Allen Wrench with Phillips Screwdriver and Wrench provided.
NOTE: It is recommended that you always use the aid of a second
person when assembling the treadmill.
Hardware:
(50) Bolt M10x55mm (60) Washer M10
2 PCS 2 PCS
12