Table of Contents
Advertisement
Mounting the auger
▀
Ø75, 1.7 and 2.5 m, mounting in Mafa Micro, Mini or Midi Storage.
Make sure the helix spiral is 15-25 mm inside the plastic tube (1). Adjust by loosening the
clamp (2) and move the plastic tube to the correct dimensions.
Adjust the store location so that the feed screw is properly positioned over the burner, with
a tilt of between 30 - 45 °. Mount a hook in the ceiling above the auger for hanging it in the
strap. (min. Ø6, not included).
Insert the auger into the store pipe, it shall rest entirely on the store lid (3). Secure Mafa
storage lid with 2 short screws (4), alt. used a hose clamp (5) as a stop. Hang the auger on
the hook with the strap. Install appropriate flexi hose and make the final adjustment to the
burner. Move the screw and the storage so that the hose reduction can be pressed in to
the fall shaft. The hose should not be stretched or squashed.
Check inside the store that the auger intake is completely visible. Adjust, if necessary, by
loosening the clamp (2) and rotate the plastic tube to the correct position. First select the
pipe location in the longitudinal direction so that the former adjustment does not change.
Make sure the clamp is applied and tightened before the auger is in operation. Connect the
power cable to the burners connector.
Ø90 steel, 1.7 and 2.3 m, mounting in Mafa Micro, Mini or Mini Storage.
The spiral must stay just outside or in line with
the tube (not adjustable). Insert the auger 420
mm of the store pipes, mount hose clamps (5)
to stop. Check inside the store that the auger
intake is completely visible. Adjust and hang up
as described for Ø75 feed screw.
Install the screw engine in the flange of the
screw. The M8-screw with distance tube should
stay in the motor plate to lock the motor from
rotating. Be sure the locking screw in flange is
in the groove on the motor shaft and tighten.
Connect the power cable to the burner.
34
Effecta AB Västra Rågdalsvägen 21 434 99 Kungsbacka Sweden +46-300 - 22320 info@effecta.se
Advertisement
Table of Contents
