Table of Contents
Advertisement
▀
Menu system
Shunt control
►
Sensor
Room temp
Flow. temp.
Radiator pump
Max flow temp
Min flow temp
Max room temp.
Min room temp
Heating off
Outdoor temp
Heat curve
Slope
Adjustment
Energy saver
DHW Priority
El. heater
►
El. step 3-6-9
Fuse A
El. heater
6 kW
El. heater
3 kW
Other settings
►
Weekday
Time
Calibrate sensors
Function test
Alarms
Language
Start guide
►
Calibrate sensors
Sensor G1
Sensor G2
Sensor G3
Sensor G4
Sensor G5
Sensor G6
Sensor G7
Outdoor
Indoor
Effecta AB Västra Rågdalsvägen 21 434 99 Kungsbacka Sweden +46-300 - 22320 info@effecta.se
Options for the shunt control
Option of control, (ROOM, OUTDOOR or BOTH.
Option of set value of the room temperature
Temp. to radiator/underfloor heating G7.
On/Off control of radiator pump.
Maximum allowed temperature to the flow.
Minimum allowed flow temp.
Maximum allowed room temp.
Minimum allowed room temp. Shunt opens full at set temp.
Outdoor temp when heating turns off. Rad. pump is runned 1min/2hours.
Outdoor temperature at the outdoor sensor
The heating curve for the heating control (page 27).
Option of slope to the heat curve (page 27).
Option of adjustment to the heat curve (page 27).
Options for energy saver (such as day/time/temp control.
Options for DHW Priority
Options for the electrical heater.
Choose between different effects on the electrical heater. 1 phase is maximum 3kW
Current load to the fuse in Amps.
Log of runtimes of the different electrical heating steps.
Setting of current weekday
Setting of current time
Option to calibrate/adjust all the sensors connected.
Test mode of the products different functions.
Alarm log
Choice of system language
Initiates the Start guide
Calibration of each sensor +/- °C
21
Advertisement
Table of Contents
