Custom Prefix; Enable/Disable Custom Prefix; Set Custom Prefix - Newland FR4060 Akame User Manual

Custom Prefix

Enable/Disable Custom Prefix

If custom prefix is enabled, you are allowed to append before the scanned data a user-defined prefix that cannot exceed 10
characters. For example, if the custom prefix is "AB" and the scanned data is "123", the Host will receive "AB123".
**【Disable Custom Prefix】

Set Custom Prefix

To set a custom prefix, scan the Set Custom Prefix barcode, the numeric barcodes corresponding to the hexadecimal
value of a desired prefix and the Save barcode.
Note: A custom prefix cannot exceed 10 characters.
Set the custom prefix to "CODE" (its hexadecimal value is 0x43/0x4F/0x44/0x45):
1.
2.
3.
4.
5.
6.
111
【Set Custom Prefix】
Scan the Enter Setup barcode.
Scan the Set Custom Prefix barcode.
Scan the numeric barcodes "4","3","4","F","4","4","4" and "5".
Scan the Save barcode.
Scan the Enable Custom Prefix barcode.
Scan the Exit Setup barcode.
【Enter Setup】
【Enable Custom Prefix】
**【Exit Setup】