Table of Contents
Advertisement
Power On, Power Off, Reboot
Power on the scanner
Connect the FR40 scanner to a Host. Then the scanner will be turned on.
Power off the scanner
Remove the communication cable from the FR40 scanner; or remove the USB cable from the Host; or disconnect the
power adaptor from mains.
Reboot the scanner
If the FR40 scanner stops responding to input or runs abnormally, turn off the scanner and then turn it back on.
Maintenance
The scan window should be kept clean.
Do not scratch the scan window.
Use soft brush to remove the stain from the scan window.
Use the soft cloth to clean the window, such as eyeglass cleaning cloth.
Do not spray any liquid on the scan window.
Do not use any detergent to clean other parts of the device except for water.
The warranty DOES NOT cover damages caused by inappropriate care and maintenance.
8
Advertisement
Table of Contents
