Upc-E; Restore Factory Defaults; Enable/Disable Upc-E; Transmit Check Digit - Newland FR4060 Akame User Manual

UPC-E

Restore Factory Defaults

Enable/Disable UPC-E

**【Enable UPC-E】
If the scanner fails to identify UPC-E barcodes, you may first try this solution by scanning the Enter Setup
barcode and then Enable UPC-E barcode.

Transmit Check Digit

UPC-E is 8 digits in length with the last one as its check digit used to verify the integrity of the data.
**【Transmit UPC-E Check Digit】
51
**【Restore the Factory Defaults of UPC-E】
【Disable UPC-E】
【Do Not Transmit UPC-E Check Digit】
【Enter Setup】
**【Exit Setup】