Check Digit Verification - Newland FR4060 Akame User Manual

Check Digit Verification

Check digits are optional for Code 93 and can be added as the last two digits, which are calculated values used to verify the
integrity of the data.

Disable: The scanner transmits Code 93 barcodes as is.

Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Code 93 barcodes to verify
that the data complies with the check digit algorithm. Barcodes passing the checks will be transmitted except the last
two digits, whereas those failing them will not be transmitted.

Transmit Check Digit After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the
data complies with the check digit algorithm. Barcodes passing the checks will be transmitted, whereas those failing
them will not be transmitted.
**【Do Not Transmit Check Digit After Verification】
If the Do Not Transmit Check Digit After Verification option is enabled, Code 93 barcodes with a length
that is less than the configured minimum length after having the two check digits excluded will not be
decoded. (For example, when the Do Not Transmit Check Digit After Verification option is enabled and
the minimum length is set to 4, Code 93 barcodes with a total length of 4 characters including the two
check digits cannot be read.)
77
【Disable】
【Transmit Check Digit After Verification】
【Enter Setup】
**【Exit Setup】