Table of Contents
Advertisement
Introduction
This manual provides detailed instructions for setting up and using the NLS-FR40XX-3X fixed mount barcode scanner
(hereinafter referred to as "FR40 scanner" or "the scanner").
Chapter Description
Chapter 1, Getting Started
Chapter 2, System Settings
Chapter 3, Scan Preferences
Chapter 4, Scan Mode
Chapter 5, RS-232 Interface
Chapter 6, USB Interface
Chapter 7, Symbologies
Chapter 8, Prefix & Suffix
Appendix
1
Preface
: Gives a general description of FR40 scanner.
: Introduces configuration methods and describes how to configure general
parameters of FR40 scanner.
: Describes how to adjust the scanner to decode barcodes on different
mediums.
: Describes how to configure scan mode.
: Describes how to configure RS-232 communication parameters.
: Describes how to configure USB communication parameters.
: Lists all supported symbologies and describes how to configure the
relevant parameters..
: Describes how to use prefix and suffix to customize scanned data.
: Provides factory defaults table and a bunch of frequently used
programming barcodes.
Advertisement
Table of Contents
