Table of Contents
Advertisement
【Enter Setup】
Default Settings
Factory Defaults
Scanning the following barcode can restore the scanner to the factory defaults.
You may need to reset all parameters to the factory defaults when:
scanner is not properly configured so that it fails to decode barcodes.
you forget previous configuration and want to avoid its impact.
Custom Defaults
Custom defaults make it possible to save the frequently-used settings on the scanner.
Scanning the Save as Custom Defaults barcode can save the current settings as custom defaults. Once custom default
settings are stored, they can be recovered at any time by scanning the Restore All Custom Defaults barcode.
Custom defaults are stored in the non-volatile memory and they won't be lost when power is removed.
【Save as Custom Defaults】
Restoring the scanner to the factory defaults will not remove the custom defaults from the scanner.
**【Exit Setup】
【Restore All Factory Defaults】
【Restore All Custom Defaults】
18
Advertisement
Table of Contents
