Itf-6 - Newland FR4060 Akame User Manual

ITF-6

ITF-6 is a special kind of Interleaved 2 of 5 with a length of 6 characters and the last character as the check character. By
default, ITF-6 is disabled.
ITF-6 priority principle: For the Interleaved 2 of 5 barcodes with a length of 6 characters and the last character as the check
character, the ITF-6 configurations shall take precedence over the Interleaved 2 of 5 settings.
An example of the ITF-6 priority principle: when ITF-6 is enabled and Interleaved 2 of 5 is disabled, the
scanner only decodes Interleaved 2 of 5 barcodes with a length of 6 characters and the last character as
the check character.
63
【Restore the Factory Defaults of ITF-6】
**【Disable ITF-6】
【Enable ITF-6, Do Not Transmit Check Digit】
【Enable ITF-6, Transmit Check Digit】
【Enter Setup】
**【Exit Setup】