Check Digit Verification - Newland FR4060 Akame User Manual

Check Digit Verification

Check digits are optional for Code 11 and can be added as the last one or two digits, which are calculated values used to
verify the integrity of the data.
If the Disable option is enabled, the scanner transmits Code 11 barcodes as is.
【Disable】
**【One Check Digit, MOD11】
【Two Check Digits, MOD11/MOD11】
【Two Check Digits, MOD11/MOD9】
If you select a check digit algorithm and the Do Not Transmit Check Digit option, Code 11 barcodes with
a length that is less than the configured minimum length after having the check digit(s) excluded will not be
decoded. (For example, when the One Check Digit, MOD11 and Do Not Transmit Check Digit options
are enabled and the minimum length is set to 4, Code 11 barcodes with a total length of 4 characters
including the check digit cannot be read.)
81
【One Check Digit, MOD11 (Len<=10)】
【Two Check Digits, MOD11/MOD11(Len>10)】
【One Check Digit, MOD11 (Len<=10) 】
【Two Check Digits, MOD11/MOD9 (Len>10)】
**【Do Not Transmit Check Digit】
【Transmit Check Digit】
【Enter Setup】
**【Exit Setup】