Alphatech Brave series User And Service Manual page 32

Parameter Value
45
46
Dd command to switch over to the DAY regime [2 spaces] /
Nn command to switch over to the NIGHT regime [2 spaces] /
1
/ command is always 2 digits, but if you wish to switch over from Day to
Night with a single digit from the phone, there is an option to input "*a",
where a is a single number and the star represents an empty space and
must be in the first place
Note. The Day/Night switch over regime stays set following line disconnection.
Parameter Value
47
e – Choice of regime numbers; e=0 selects numbers from first and second
group, e=1 selects numbers in accordance with the Day/Night regime.
WARNING !! setting this parameter materially affects the number dialling!
Parameter Value
4*
k – Line disconnection by repeated pressing of the same number:
k=0 function is disabled; and
k=1 repeatedly pressing the same button to disconnect the line.
WARNING !! setting of this parameter materially affects number dialling!
32
Meaning
Command for switch over to DAY
dd
Command for switchover to NIGHT
nn
(e.g. parameters 35,36)
Meaning
e
Regime system choice
Meaning
Line disconnection function by repeatedly
k
pressing a button
BRAVE SlimDP –
(00-99,*0-*9)
(0099,*0-*9)
User and service manual
Basic
11
10
1
1
Basic
1
(0/1)
Basic
1
(0/1)