Table of Contents
Advertisement
Helmet cable
Remove the passenger seat and the rider seat as
explained under "Removing the seats" page 305.
Pass the cable (1) through the helmet and insert both
ends of the cable in the frame pin (2).
Leave the helmet hanging and refit the rider seat and
the passenger seat to hold it in place.
Warning
This device protects the helmet against theft
when the motorcycle is parked. Do not leave the
helmet attached when riding the motorcycle; it could
interfere with your movements and cause loss of
control of the motorcycle.
1
2
1
Fig. 215
1
Fig. 216
311
Advertisement
Table of Contents
