Trip time
The instrument panel calculates and displays the trip
time as hhh:mm followed by TRIP TIME. The
calculation is made considering the time traveled
since the last TRIP A reset. When TRIP A is reset, the
value is set to zero. The time count active phase
occurs when the engine is running and the vehicle is
stopped (the time is automatically stopped when the
vehicle is not moving and the engine is off and
restarts when the counting active phase starts again).
When the reading exceeds 511:00 (511 hours and 00
minutes), the meter is reset and automatically starts
counting from 0 again.
Fig 33
75